Looking for a arias/ Fontana p

Stant · 9/19/24, 1:50 PM

4.030 bore #2 or 4 cylinder, 1.125 comp height 1/16 1/16 3/16 trying to complete a set has 400-ss on bottom. Tnx

Frank Reiner · 9/19/24, 5:49 PM

Mark,

Is that boat ever going to get wet again? Engines and parts are available, just not that specific piston.

Stant · 9/19/24, 6:09 PM

We just finished the season you can watch it on. My youtube just look for mlong5151. We have 1 fresh Fontana and are going thru the one we just had in . the three I have came out of the one I bought in 2018. I would like to build a iron short block with them if I can find a 4th. Tnx for the reply

Frank Reiner · 9/19/24, 7:58 PM

You might consider an inquiry with JE. They have supplied Duggan/Fontana/Arias pistons in the past.
The set that I have is 4.030, but the pin height is 1.050.

9/19/24, 1:50 PM	#1
Stant Member Join Date: Sep 2015 Posts: 64	4.030 bore #2 or 4 cylinder, 1.125 comp height 1/16 1/16 3/16 trying to complete a set has 400-ss on bottom. Tnx _________________________________________________ Last edited by Stant; 9/19/24 at 8:55 PM.

9/19/24, 5:49 PM	#2 Re: Looking for a arias/ Fontana p
Frank Reiner Member Join Date: Oct 2013 Posts: 96	Mark, Is that boat ever going to get wet again? Engines and parts are available, just not that specific piston.

9/19/24, 6:09 PM	#3
Stant Member Join Date: Sep 2015 Posts: 64	We just finished the season you can watch it on. My youtube just look for mlong5151. We have 1 fresh Fontana and are going thru the one we just had in . the three I have came out of the one I bought in 2018. I would like to build a iron short block with them if I can find a 4th. Tnx for the reply

9/19/24, 7:58 PM	#4 Re: Looking for a arias/ Fontana p
Frank Reiner Member Join Date: Oct 2013 Posts: 96	You might consider an inquiry with JE. They have supplied Duggan/Fontana/Arias pistons in the past. The set that I have is 4.030, but the pin height is 1.050.