bam (Offline)
#1
3/2/10 7:09 PM
trying to get all my fuel settings right this is kicking my ... i know i am close but it is still running lean just needing a little help
6565 (Offline)
#2
3/3/10 11:02 AM
Have you had the pump checked & flowed? If you have a diaphram high speed, is the rubber diaphram OK?
BRENT (Offline)
#3
3/3/10 7:50 PM
I chased a fuel problem all season one year. I tried what I knew, what friends knew, but I finally fixed the problem after a call to Kinsler, and a run on the dyno. Just been minor adjustments since then.
jontheturboguy (Offline)
#4
3/4/10 11:19 PM
Just a question since we don't know your back ground.... do you know how to tune an injection system?
Vinyl Works (Offline)
#6
3/6/10 8:13 PM
For a sure way of geting your settings correct. Call Brad Kuhn or Rick at Fontana Engines. They are located in Rochester,IN in the same building as Gearte engines. The number to reach Brad is 317-373-0351.
If Brad cant help you he can get Rick's phone number. They offer chassis dyno service at that location. I would reccomend that, Its not that expensive and it will answer all your questions. Plus you will get the most out of your engine and your fuel system will be set.
Scott