Len Cockman (Offline)
#1
9/19/24 10:11 AM
Hello:
I am upgrading my garage/shop with some wall mounted tire racks. Two that I previously purchased work fine for our 600 tires as well as the 410 fronts. I'm in the market for a rack or several racks that can hold the LR and RR 410 tires. I'm wanting the wall mounted racks so they are up off the floor
Any suggestions are most helpful.
Thanks,
Len
Len Cockman, South Bend, Indiana
"We've done so much with so little for so long that now we can do almost anything with almost nothing."
spankytoo (Offline)
#2
9/19/24 3:50 PM
they are basically triangle ends with a cross bar. go to a local metal supply and build your own and lag screw them to studs
If you look in your mirror and see a line of cars behind you, be kind and pull over.
2 Likes:
jdull99, Len Cockman
jdull99 (Offline)
#4
9/19/24 11:58 PM
mega dittos to the last two posts...considering the signature on the thread starter..."doing anything with next to nothing, etc"...
Jason Dull
815 494 6002
jdull99@hotmail.com
Steel$ & Deal$ Swap Meet & Car Shows (next location; TBD...)
Len Cockman (Offline)
#6
9/24/24 5:59 AM
Thanks much. I did not work in, or come from a racing-related background. And, while i worked for a bit at a steel fabricating shop, I sometimes forget the obvious and go for the pre-fab.
Len Cockman, South Bend, Indiana
"We've done so much with so little for so long that now we can do almost anything with almost nothing."
2 Likes:
PIT CART, racenut69
