Chalk coil front car roller or turnkey

Sprinter187 · 3/5/11, 10:14 AM

2005 Chalk Non-wing Dirt Sprint Car

Roller, add seat and motor and go! $6500 Lots of new parts with less than 8races on them.

Light weight winters 4.86 rear end
C&R radiator
Ram Engineering Bilstein shocks
Saldana Fuel Cell
Lee Steering gear
KRC vane steering pump
DMI spindles
DMI ball housing and torque tube
Wilwood brakes
Winters hubs
Sanders wheels (new hubs in LR wheels)
New Chalk birdcages
New Chalk swaybar kit
Spare torsion bars (all Chalk Stix bars)
Spare radius rods
Spare front axle
2 RR wheels. 2 LR wheels

Also available with Bill Johnson 410:
Aluminum Donovan block
NEW Callies crank
NEW Ross pistons
NEW Howards Rods
Huggins Cam
T&D rockers
Brodix -12 heads
Hilborn down nozzle injection
Waterman 500 pump
New Wulff oil pump
Vertex Mag
All new plmbing
+$10,000 w/ engine, will not sell the engine alone

Car could be converted easily for pavement to run Spartan and South Bend. This car is all top notch equipment, it was built in 2008 for my dad to run with MTS in 2009, we didn't finish the 410 motor until the end of the 2009 season it only has a couple nights on it and has not been run hard. The car was competitive with my 360 engine in it. All good equipment, lots of new parts were used to build it. Would trade for a JEI or Maxim 4-bar winged car kit for kit, or roller for roller with cash either way if necessary.

The previous owner was Matt Westfall, he won a USAC race at Eldora with this car. Comes with the setup sheet from Tom Chalk.

email: gavinhunyady@gmail.com or call 810 610 3616

Sprinter187 · 3/22/11, 11:23 PM

will sell as a deluxe kit with spare bars and radius rods for $2000

Sprinter187 · 5/26/11, 2:44 PM

deluxe kit:

Frame/body/motorplates
arms + spares
bars + spares
birdcages
sway bar + extra bar
2 52" front axles

$2000

3/5/11, 10:14 AM	#1 Trade or sell Chalk coil front kit or roller
Sprinter187 Member Join Date: Sep 2008 Posts: 10	2005 Chalk Non-wing Dirt Sprint Car Roller, add seat and motor and go! $6500 Lots of new parts with less than 8races on them. Light weight winters 4.86 rear end C&R radiator Ram Engineering Bilstein shocks Saldana Fuel Cell Lee Steering gear KRC vane steering pump DMI spindles DMI ball housing and torque tube Wilwood brakes Winters hubs Sanders wheels (new hubs in LR wheels) New Chalk birdcages New Chalk swaybar kit Spare torsion bars (all Chalk Stix bars) Spare radius rods Spare front axle 2 RR wheels. 2 LR wheels Also available with Bill Johnson 410: Aluminum Donovan block NEW Callies crank NEW Ross pistons NEW Howards Rods Huggins Cam T&D rockers Brodix -12 heads Hilborn down nozzle injection Waterman 500 pump New Wulff oil pump Vertex Mag All new plmbing +$10,000 w/ engine, will not sell the engine alone Car could be converted easily for pavement to run Spartan and South Bend. This car is all top notch equipment, it was built in 2008 for my dad to run with MTS in 2009, we didn't finish the 410 motor until the end of the 2009 season it only has a couple nights on it and has not been run hard. The car was competitive with my 360 engine in it. All good equipment, lots of new parts were used to build it. Would trade for a JEI or Maxim 4-bar winged car kit for kit, or roller for roller with cash either way if necessary. The previous owner was Matt Westfall, he won a USAC race at Eldora with this car. Comes with the setup sheet from Tom Chalk. email: gavinhunyady@gmail.com or call 810 610 3616 _________________________________________________ Last edited by Sprinter187; 3/8/11 at 9:19 PM.

3/22/11, 11:23 PM	#2 Re: Chalk coil front car roller or turnkey
Sprinter187 Member Join Date: Sep 2008 Posts: 10	will sell as a deluxe kit with spare bars and radius rods for $2000

5/26/11, 2:44 PM	#3 Re: Chalk coil front car roller or turnkey
Sprinter187 Member Join Date: Sep 2008 Posts: 10	deluxe kit: Frame/body/motorplates arms + spares bars + spares birdcages sway bar + extra bar 2 52" front axles $2000