P&S MIDGET Spindles and Hubs

p8ntman442 · 3/15/15, 5:27 PM

MIDGET MIDGET MIDGET
March 2015
Have two spindles with arms both P&S one with arm welded on, one bolted.
Two hubs, one loaded with bearings, nut and greased. No dust cap. the hubs are not the same, one is older steel, with no markings except RF, and the other is newer, with scribed markings P&S, NYCO hubs, and RF.
One used kingpin, One NUT. All threads appear good, and loaded spindle spins free with no bind.

As these are not a matched set, I'll separate. Please check out the photos and let me know what you want, and make an offer on what you want please, I've seen some of these spindles go for ~$100 on here. if its not shown, I don't have it.

http://s51.photobucket.com/user/p8nt...PnS%20Spindles

p8ntman24@hotmail.com

MIDGET MIDGET MIDGET

3/15/15, 5:27 PM	#1 P&S MIDGET Spindles and Hubs
p8ntman442 Member Join Date: Sep 2012 Posts: 7	MIDGET MIDGET MIDGET March 2015 Have two spindles with arms both P&S one with arm welded on, one bolted. Two hubs, one loaded with bearings, nut and greased. No dust cap. the hubs are not the same, one is older steel, with no markings except RF, and the other is newer, with scribed markings P&S, NYCO hubs, and RF. One used kingpin, One NUT. All threads appear good, and loaded spindle spins free with no bind. As these are not a matched set, I'll separate. Please check out the photos and let me know what you want, and make an offer on what you want please, I've seen some of these spindles go for ~$100 on here. if its not shown, I don't have it. http://s51.photobucket.com/user/p8nt...PnS%20Spindles p8ntman24@hotmail.com MIDGET MIDGET MIDGET _________________________________________________ Last edited by p8ntman442; 3/15/15 at 7:15 PM.