Attention ERC Chassis Owners!!!!!!

RPM Racecraft · 8/4/11, 9:06 PM

hi

terry kelly jr · 8/5/11, 8:31 PM

how about whole chassis ?

tk

RPM Racecraft · 8/5/11, 10:03 PM

Are you looking for a new or used chassis? We plan to build some new chassis after the racing season this year. We also plan to make some small changes to make them a little more modern. The biggest change will be to make the drivers compartment. It will be a little wider to accommodate a bigger driver. Allen and I had talked about making a lot of the changes before he pasted away. He got sick before we could build a car with the updates. We also build drag cars and we currently have on the jig. We use the same jig table on both. So as soon as we get it off the jig we will start on new cars.

Thanks, Ryan

terry kelly jr · 8/6/11, 9:56 AM

id like to see a coilover front car with about 3-4 inches wider in the cockpit and a touch longer like maybe 2 inches.. and make the front look attractive like i did my erc when i made it a coilover front.. we are going to continue running minis here so it would be nice to see some budget priced good cars like these..we really like ours as it is lightweight and hooks up..also id use a 13 5/8 ladder on it , that freed my car up alot so it wasnt so tight in the middle of the turns.. just a thought

tk 563-343-9618

RPM Racecraft · 8/9/11, 1:54 AM

Thanks for the input! Ill that in mined.

Thanks, Ryan
Posted using Mobile Device

boomhower · 2/26/15, 12:22 PM

Is erc still in business?

97juicedgmc · 2/26/15, 8:15 PM

the last ERC cars they made were longer and wider i beleive it was 09 or 10 i think Jeff Barnhart bought ERC or just the jigs whatever and made only a few cars, i think 2 or 3. before they tanked. im sure Ryan probably knows more about it but the cars were 3 inches longer and about 3 inches wider, and was very similar to a FOZ it used midget birdcages with the Z-link rear suspension , it had a FOZ midget front axle, same width as the bailey or erc axles but had the full midget spindles and and 1 3/4" diameter axle. its a sharp car and was a decent piece that was modernized. the only 2 people i remember having them was Jeff Barnhart and Craig Stower and craig had 2 cars.

wesleyvandrunen · 2/26/15, 8:17 PM

The one I owned I liked it it was a 2000 it was built bigger too wish I would of kept that car now

97juicedgmc · 2/26/15, 8:18 PM

more

candcsracing · 2/26/15, 9:02 PM

I still have a list of where all the parts can be bought, except frame.

8/4/11, 9:06 PM	#1
RPM Racecraft Member Join Date: Dec 2010 Posts: 14	hi _________________________________________________ Last edited by RPM Racecraft; 5/11/17 at 6:44 PM.

8/5/11, 8:31 PM	#2 Re: Attention ERC Chassis Owners!!!!!!
terry kelly jr Member Join Date: Jul 2010 Posts: 89	how about whole chassis ? tk

8/5/11, 10:03 PM	#3 Re: Attention ERC Chassis Owners!!!!!!
RPM Racecraft Member Join Date: Dec 2010 Posts: 14	Are you looking for a new or used chassis? We plan to build some new chassis after the racing season this year. We also plan to make some small changes to make them a little more modern. The biggest change will be to make the drivers compartment. It will be a little wider to accommodate a bigger driver. Allen and I had talked about making a lot of the changes before he pasted away. He got sick before we could build a car with the updates. We also build drag cars and we currently have on the jig. We use the same jig table on both. So as soon as we get it off the jig we will start on new cars. Thanks, Ryan

8/6/11, 9:56 AM	#4 Re: Attention ERC Chassis Owners!!!!!!
terry kelly jr Member Join Date: Jul 2010 Posts: 89	id like to see a coilover front car with about 3-4 inches wider in the cockpit and a touch longer like maybe 2 inches.. and make the front look attractive like i did my erc when i made it a coilover front.. we are going to continue running minis here so it would be nice to see some budget priced good cars like these..we really like ours as it is lightweight and hooks up..also id use a 13 5/8 ladder on it , that freed my car up alot so it wasnt so tight in the middle of the turns.. just a thought tk 563-343-9618

8/9/11, 1:54 AM	#5
RPM Racecraft Member Join Date: Dec 2010 Posts: 14	Thanks for the input! Ill that in mined. Thanks, Ryan Posted using Mobile Device

2/26/15, 12:22 PM	#6
boomhower Member Join Date: Feb 2015 Posts: 2	Is erc still in business?

2/26/15, 8:17 PM	#8
wesleyvandrunen Member Join Date: Jan 2015 Posts: 8	The one I owned I liked it it was a 2000 it was built bigger too wish I would of kept that car now

2/26/15, 9:02 PM	#10 Re: Attention ERC Chassis Owners!!!!!!
candcsracing Member Join Date: Nov 2009 Posts: 2	I still have a list of where all the parts can be bought, except frame.